You will not be allowed to compare more than 4 products at a time
View compareVico Marine offers a complete line of installation tools to work seamlessly with our industry-leading boat ventsĀ® and support poles. Whether youāre a professional canvas shop, a marine dealer, or a dedicated boating enthusiast, youāll find everything you need to install, enhance, and maintain your Vico Marine system with confidence.
Ā Installation Tools and Accessories
Boat VentĀ® 2 & 3 Circle Cutter
Save time and money using the Boat VentĀ® circle cutter. Setup the cutter using the correct Boat VentĀ® 2 or Boat VentĀ® 3 shaft length and simply push down and a turn the handle. The blade below will easily cut through the canvas leaving you with the perfect hole size for the vent.Ā
- Works with Boat VentĀ® 2 or Boat VentĀ® 3
- Blade included with each tool (replacements available)
- Blades are extremely sharp for ease of cuttingĀ
Boat VentĀ® 3 Wrench
The Boat VentĀ® 3 wrench is an easy way to secure the Boat VentĀ® 3 nut to the body. Made from lightweight aluminum, the wrench is a quick, cost-effective tool to decrease labor time.Ā Ā
- Provides faster way to install Boat VentĀ® 3
- Lightweight aluminum
Boat VentĀ® 3 Socket
The Boat VentĀ® 3 socket is specifically designed to be used with a handheld drill or impact wrench. Rather than tightening by hand, let the drill do the work to make sure the washer is securely installed.Ā
- Made from lightweight aluminumĀ
- Works with 1/4" arbor
Boat VentĀ® 2 Socket
The Boat VentĀ® 2 socket is specifically designed to be used with a handheld drill or impact wrench. Rather than tightening by hand, let the drill do the work to make sure the washer is securely installed.Ā
- Works with 3/8" arbor
Marine Accessories
1/4 Lever Ratchet
The Built-In Ratchet is the quickest way to secure your boat cover, without giving up any of the advantages of a standard ratchet. This Built-In version of our 1/4" rope ratchet has an added lever, which allows it to be ratcheted. This allows the Built-In Ratchet to handle heavier loads, and secure tighter.
- Works with 1/4" rope
- 4 convenient ways of tensioning the rope: pull the loose end of the rope like the Original Tie-Down series, using a socket wrench in the socket drive on either side of the hub, or using the built-in ratchet handle feature.
- Easy Release thumb tab on ratchet handle
- Working load limit of 225 lbs
1/4 - 500 ft Rope Rolls
- 16 braid polyester with parallel cord
- Low stretch
- UV resistant
- Breaking strength of 1,100lbs
- Doesn't absorb water, so it doesn't rot over time
